Ion sensors are very versatile sensors used to selectively measure dissolved ions in solution. Standard sensors selected from a catalog that are not optimized to your process/situation often lead to poor performance. But wait! Before you discount these versatile and well established sensors altogether, consider the fact that most ion selective sensors need optimization to perform to expectation. You need expert help to optimize. At United Science, we are sensor materials and sensor optimzation experts. We provide total sensor solutions including optimization, sample conditioning, and datalogger selection. Pre and post sales support, repair and calibration services are all part of the package that you get when you when you buy from United Science.

Ready for Expert Help? Get started here!

Single use ion sensors are used in a variety of industrial settings such as bio-processing. These sensors are configured as 1/4-28 or M6 nuts or Luer Lock fittings. Simply screw the pre conditioned fitting sensor onto the manifold or cross to allow continuous monitoring of a flowing fluid. A calibration routines can be programmed into a valve for easy implementation. If you have two phase solutions, then we recommend passive, low cost bubble removal downstream of the sensor manifold.

These sensors are miniaturized for various laboratory and industrial applications. With an outside diameter of 4 mm, they can be threaded through septa to give access to reaction vessels. Or they can be used in the laboratory. They are built on solid contacts and have no inner filling solution and are configured to measure a wide variety of ions. Reference electrodes utilizing the same form factor must be used with each mini sensor. Teradaq dataloggers provide consistent wireless datalogging performance for your application.